Roll-Up Garage Door Service in Augusta, GA
Service and repair for rolling doors on shops, storage units, warehouses and outbuildings — curtains, guides, springs, locks and operators.
Keeping Roll-Up Doors Rolling
Roll-up doors work differently from sectional garage doors. Instead of panels riding in tracks to the ceiling, a curtain of interlocking slats coils around a barrel above the opening. A spring inside the barrel counterbalances the curtain, and the edges ride in vertical guides.
That design is compact and tough, which is why it is common on storage units, shops, warehouses and outbuildings. It still needs adjustment and repair: guides wear, slats bend, springs lose tension and locks seize.
- Bent slats and curtain damage
- Worn or bent side guides
- Barrel spring tension adjustment
- Bottom bar, astragal and weather seal
- Manual locks, chain hoists and operators
Common roll-up door problems
- Door is hard to lift or won’t stay up. The barrel spring has lost tension or broken.
- Door drops or slams. Spring tension is too low or a spring has failed.
- Curtain jumps out of the guide. Bent guides, impact damage or worn windlocks.
- Scraping and sticking. Dirt in the guides, bent slats or misaligned guides.
- Lock won’t engage. Slide locks and cylinder locks rust or bend.
- Bottom seal damaged. Water and pests get under the door.
Spring tension on rolling doors
The spring inside a roll-up door barrel is under significant tension. Adjusting or replacing it requires the curtain to be secured and the tension released in a controlled way. Do not remove the barrel bracket bolts or tension wheel.
Need help with this today?
Call to describe what your door is doing and schedule a visit from a garage door technician.
What a service visit includes
- Inspecting the curtain, slats, end locks and bottom bar.
- Cleaning and checking the guides for alignment and wear.
- Checking barrel spring tension and adjusting for proper balance.
- Lubricating the barrel bearings and moving parts as recommended.
- Checking locks, pull ropes, chain hoists or operators and safety devices.
- Recommending repairs or replacement parts where needed.
Who uses roll-up doors
Roll-up doors are common on self-storage, auto shops, warehouses, workshops, barns and detached garages. For overhead sectional doors at businesses, see commercial garage door repair. For a planned service schedule, see maintenance.
Related Garage Door Services
Work that often goes hand in hand with roll-up door service.
Common problems that lead to this service
Roll-Up Door Service FAQs
Why is my roll-up door so hard to lift?
The spring inside the barrel has probably lost tension or broken. A technician can adjust or replace the spring to restore balance.
Can a bent roll-up door slat be replaced?
Often, yes. Damaged slats can be replaced individually on many curtain designs, depending on the manufacturer and slat profile.
Should I lubricate roll-up door guides?
Clean the guides first. Many manufacturers recommend a dry lubricant or none in the guides, with lubrication at the barrel bearings. Follow the door’s guidance.
Do you service roll-up doors on storage units?
Yes. Call to describe the number of doors and the problems you’re seeing.
Can you add an opener to a roll-up door?
Many roll-up doors can be motorized with the right operator. The door must be balanced first, and safety devices are required.
What causes a roll-up door to come out of its guides?
Impact damage, bent guides, wind load on doors without windlocks, or worn end locks on the slats.
Roll-Up Door Service Across the Augusta Area
We schedule this service in Augusta and the nearby communities below. Call to confirm availability for your address.
Need Garage Door Help
in Augusta, GA?
Call now to describe the problem and schedule a visit.